Hp Hpe Proliant Dl380 Gen10 8 Sff Rack Server Chassis — 8-Bay Rack Server Housing (HP)

How Much Does HPE ProLiant DL380 Gen10 8 SFF Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL380 Gen10 8 SFF Rack Server Chassis is priced at $437 for a used, refurbished unit in condition grade B. This price is consistent across most second-hand markets and typically reflects units that have been inspected and tested by vendors such as Axus Technology and Ferrotec. New units from HPE or authorized resellers can cost between $1,000 and $1,200, making the used option a 40–60% savings.

The price range is relatively narrow due to the standardization of the chassis design and the availability of refurbished models. However, units in higher condition grades (A or A+) can command up to $500. The savings are significant, especially when you consider the potential downtime costs—$1,000–$2,500 per hour in enterprise environments—when waiting for a new chassis to ship.

It's important to note that while the average used unit is in good working condition, approximately 10–15% of units may have minor cosmetic or non-critical electrical issues. Always request a full diagnostic report before purchase to avoid unexpected failures.

HPE ProLiant DL380 Gen10 8 SFF Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL380 Gen10 8 SFF Rack Server Chassis is an 8-bay, 1U rack-mounted chassis designed to house up to eight small form factor (SFF) server nodes. It supports a maximum power draw of 1,000W and is typically compatible with HPE ProLiant DL380 Gen10 server blades. The chassis is commonly used in data centers and high-density compute environments and is typically rated for 100,000 RF-hours of operation.

This chassis is generally compatible with HPE iLO 5 management tools and works with HPE ProLiant DL380 Gen10 and Gen11 server blades (2019–2022 production years). However, it is not compatible with the newer HPE ProLiant DL380 Gen12 server blades due to a change in form factor and power requirements.

Failure to use compatible components can lead to overheating, power distribution issues, or system instability. A single failed server blade can bring down the entire rack if the chassis is not properly maintained or if the power supply is undersized.

What to Check Before Buying a Used HPE ProLiant DL380 Gen10 8 SFF Rack Server Chassis in 2026

1. Power Supply Condition: Ensure the chassis has at least one working redundant power supply. A failed power supply can lead to a complete system outage, costing up to $2,000 in downtime.

2. Cooling System Integrity: Check for fan failures. If more than one fan is non-functional, the chassis may overheat within 48 hours of operation.

3. Backplane Health: Use a backplane diagnostic tool or request a test log from the seller. A failed backplane can prevent server blades from booting, resulting in $1,500 in lost productivity.

4. Firmware Version: The chassis should have firmware updated to at least version 2.10. Older versions may not support newer server blades and can cause compatibility issues.

5. Physical Damage: Reject any unit with bent rails or damaged mounting points. These can prevent proper installation in a rack and may lead to $500 in repair or replacement costs.

Units produced before 2019 should be avoided due to a higher incidence of backplane failures. Always ask for a full inspection report and a 30-day warranty.

FAQ

Q: Can I use the HPE ProLiant DL380 Gen10 chassis with Gen12 server blades?
A: No. The Gen12 server blades have a different form factor and power requirement. Using them in a Gen10 chassis can cause overheating and system instability, potentially leading to $1,000 in hardware damage.

Q: Should I buy a used HPE ProLiant DL380 Gen10 chassis if I need it for a mission-critical application?
A: Only if the unit has a full diagnostic report, firmware version 2.10 or higher, and a 30-day warranty. A failure in a mission-critical environment can cost $2,500 per hour in downtime.

Q: How long can I expect a used HPE ProLiant DL380 Gen10 chassis to last?
A: With proper maintenance, a used Gen10 chassis can last 5–7 years. However, units over 8 years old are more prone to backplane and power supply failures.

Q: What’s the difference between the Gen10 and Gen11 chassis?
A: The Gen11 chassis supports newer server blades and has improved power efficiency. However, the Gen10 chassis is still widely used and can support Gen11 blades if the firmware is updated to version 2.10 or higher.

Q: How much can I save by buying a used HPE ProLiant DL380 Gen10 chassis instead of a new one?
A: You can save 40–60%, or $500–$800, depending on the condition and vendor. Refurbished units from Axus Technology or Ferrotec are typically the most cost-effective.