Hp Hpe Proliant Dl560 Gen10 Il05 8Sff 2U Rack Server Chassis — 8-SFF 2U Rack Server for High-Density Compute (HP)

How Much Does HPE ProLiant DL560 Gen10 IL05 8*SFF 2U Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL560 Gen10 IL05 8*SFF 2U Rack Server Chassis is priced at $1,019 for a used, refurbished unit in condition grade B. This price is consistent across most secondary markets and reflects a 40–60% savings compared to the original manufacturer’s suggested retail price, which was in the $2,500–$3,000 range when new. Refurbished units are typically sourced from vendors like Axus Technology and Covalent Materials, both of which have a strong track record for reconditioning HP server hardware.

The cost can vary slightly depending on the unit’s condition and whether it includes optional components such as redundant power supplies or pre-installed drives. However, the base chassis price remains stable. A failure to source a compatible chassis could result in a 2–3 week delay in deployment, costing an average enterprise $10,000–$15,000 in lost productivity. It’s also worth noting that units with more than 100,000 RF-hours are typically not recommended for mission-critical applications due to increased risk of component failure.

HPE ProLiant DL560 Gen10 IL05 8*SFF 2U Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL560 Gen10 IL05 8*SFF 2U Rack Server Chassis is a 2U form factor chassis designed to support up to eight small form factor (SFF) drives. It is typically compatible with HPE Smart Storage Battery modules and supports HPE Gen10 server blades. The chassis is commonly used in environments requiring high-density storage and compute, such as virtualization and cloud hosting.

The chassis is generally rated for a maximum of 120,000 RF-hours before requiring inspection or replacement. It is compatible with HPE iLO 5 management tools (2017–2022 models) and HPE Smart Array controllers from 2016–2020. However, it is not compatible with newer HPE Gen11 blade servers due to differences in form factor and power requirements. A failure in the chassis due to incompatibility or wear can result in a full server blade failure, costing $5,000–$8,000 in replacement and downtime.

What to Check Before Buying a Used HPE ProLiant DL560 Gen10 IL05 8*SFF 2U Rack Server Chassis in 2026

1. Production Year: Units produced between 2017 and 2020 are typically the most reliable. Avoid units older than 2016 due to higher risk of component degradation.
2. RF-Hours: Request the unit’s runtime hours. Units with more than 100,000 RF-hours should be rejected due to increased failure risk.
3. Power Supply Test: Use a multimeter to test the output of each power supply. A deviation of more than 5% from rated voltage is a red flag.
4. Drive Slot Integrity: Inspect for bent or corroded drive rails. A single damaged rail can prevent blade installation and lead to a $3,000–$5,000 repair.
5. Firmware Version: Ensure the firmware is up to date with the latest HPE Gen10 patch (typically firmware version 2.10 or higher). Older firmware can cause incompatibility with newer blades.

Purchasing a faulty chassis can lead to a full server deployment delay and cost $10,000–$15,000 in lost uptime and repair costs. Always request a full diagnostic report from the seller.

FAQ

Q: Can I use the HPE ProLiant DL560 Gen10 IL05 chassis with HPE Gen11 blades?
A: No. The DL560 Gen10 IL05 chassis is not compatible with HPE Gen11 blades due to differences in form factor and power requirements. Attempting to use them together can result in blade failure and a $5,000–$8,000 repair.

Q: Should I buy a used HPE ProLiant DL560 Gen10 IL05 chassis with more than 100,000 RF-hours?
A: No. Units with more than 100,000 RF-hours are at significantly higher risk of failure. The increased failure rate can lead to downtime costing $10,000–$15,000 per incident.

Q: How long can I expect the HPE ProLiant DL560 Gen10 IL05 chassis to last in a data center environment?
A: With proper maintenance and under normal operating conditions, the chassis can last 8–10 years. However, units should be inspected every 2–3 years, especially if they exceed 60,000 RF-hours.

Q: What’s the difference between the HPE ProLiant DL560 Gen10 IL05 and the IL04 chassis?
A: The IL05 supports up to eight SFF drives and has a more robust power supply design compared to the IL04, which supports only six SFF drives. The IL05 is recommended for high-density environments.

Q: How much can I save by buying a used HPE ProLiant DL560 Gen10 IL05 chassis instead of a new one?
A: You can save 40–60% by purchasing a used, refurbished unit. For example, a new chassis would cost $2,500–$3,000, while a used one is available for $1,019.