Hp Hpe Proliant Dl580 Gen10 8Sff 4U Rack Server Chassis — High-Capacity Enterprise Server Chassis (HP)

How Much Does HPE ProLiant DL580 Gen10 8*SFF 4U Rack Server Chassis Cost in 2026?

The HPE ProLiant DL580 Gen10 8*SFF 4U Rack Server Chassis typically ranges from $2,357 to $2,900 in 2026, depending on condition and vendor. Refurbished units from Ferrotec or Axus Technology usually fall within the lower end of the range ($2,357–$2,500), while lightly used or reconditioned models from secondary markets can reach up to $2,900. New units from HP or authorized resellers cost $5,000–$6,500, making used options 40–60% cheaper.

A failed chassis can cost enterprises $10,000+ in downtime and replacement logistics, especially in mission-critical environments. However, the B-grade condition caveat means users should expect minor cosmetic wear and potential drive bay corrosion. For example, a 2022-sourced unit with 40% drive bay degradation might require $300–$500 in additional repairs. Always verify the seller’s testing protocols to avoid hidden costs.

HPE ProLiant DL580 Gen10 8*SFF 4U Rack Server Chassis Specifications and Compatible Tools

This 4U chassis supports up to 8 small-form-factor (SFF) drives, typically 2.5-inch SAS/SATA or NVMe SSDs. It features dual redundant power supplies (800W–1600W), four PCIe 4.0 slots, and a 1200W thermal design power (TDP). The chassis dimensions are 17.5 x 17.3 x 7.1 inches (444 x 439 x 180 mm), with a typical MTBF of 1.2 million hours.

Commonly compatible tools include HP iLO 5 (2019–2023 models) and Smart Storage Tools v2.30+. Incompatibility warnings apply to HP ProLiant DL380 Gen10 due to differing backplane architectures. A mismatched tool like HP Smart Update Manager v11.20+ could trigger firmware errors, leading to $15,000+ in data loss risks during upgrades. Always cross-check firmware versions with the chassis’s serial number (e.g., CN754A) before deployment.

What to Check Before Buying a Used HPE ProLiant DL580 Gen10 8*SFF 4U Rack Server Chassis in 2026

1. Production Year: Reject units manufactured before 2019. Pre-2018 models (e.g., serial numbers starting with "CN753") lack Gen10’s thermal management updates, risking overheating in high-density setups.
2. Drive Bay Health: Use HP Diagnostics v2.4+ to test all 8 SFF bays. A chassis with <4 functional bays should be rejected due to insufficient redundancy.
3. Power Supply Condition: Verify PSU wattage (800W–1600W) and test for voltage drops >5%. A failing PSU could cause $8,000+ in server crashes.
4. Firmware Version: Confirm iLO 5 firmware is ≥2.60. Older versions (e.g., 2.45) are incompatible with Windows Server 2022.
5. Physical Inspection: Reject units with bent rails or corrosion near the rear I/O. A damaged chassis could void warranties and increase repair costs by $1,200–$2,000.

Buying a poorly maintained unit risks $7,500+ in unplanned downtime. Always request a 48-hour burn-in test report from the seller.

FAQ

**Q: How does the Gen1