Hp Hpe Proliant Dx380 Gen10 Cto Rack Server Chassis — High-Density 2U Server Chassis for Enterprise Use (HP)

How Much Does HPE ProLiant DX380 Gen10 CTO Rack Server Chassis Cost in 2026?

The HPE ProLiant DX380 Gen10 CTO Rack Server Chassis is currently priced at $839 in the used market, with a narrow range due to its consistent condition and demand. This price is typically associated with units in condition grade B, which are commonly sourced from data centers and refurbished by vendors like Axus Technology and Ferrotec. Units in higher condition grades, such as A or A+, can command up to $950, while lower-grade B or C units may be available for as low as $750, depending on wear and tear.

Compared to the new price point, which can exceed $1,800, used units offer a savings of 40–60%. For organizations managing tight budgets or scaling infrastructure, this can translate to significant cost avoidance—up to $1,000 per unit—allowing for more units to be deployed or allocated to other critical systems. However, it's important to note that a failed chassis can lead to extended downtime, potentially costing $1,500–$2,000 per hour in mission-critical environments. Therefore, while the upfront cost is lower, the risk of failure must be carefully evaluated. Always verify the condition and test results before purchase.

HPE ProLiant DX380 Gen10 CTO Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DX380 Gen10 CTO is a 2U rack-mounted chassis designed for high-density computing. It typically supports up to two Intel Xeon Scalable processors and 2 TB of DDR4 memory. The chassis features 10 hot-swappable drive bays, commonly 2.5-inch SAS or SATA drives, and includes redundant power supplies. It is generally rated for up to 100,000 RF-hours of operation, though this can vary depending on usage and environmental conditions.

This chassis is commonly compatible with HPE ProLiant DL380 Gen10 and Gen11 systems, as well as third-party tools like the Dell PowerEdge R650, provided the form factor and power requirements match. However, it is not compatible with the HPE ProLiant DL360 Gen10 due to differences in motherboard layout and power supply configuration. A mismatch can lead to improper cooling or power delivery, increasing the risk of hardware failure and downtime.

What to Check Before Buying a Used HPE ProLiant DX380 Gen10 CTO Rack Server Chassis in 2026

1. Verify Production Year: The DX380 Gen10 was produced from 2018 to 2021. Units older than 2019 may have higher wear and reduced reliability.

2. Check for Corrosion and Physical Damage: Look for signs of rust or bent rails. A chassis with visible corrosion is likely to fail within 6–12 months, risking data loss and downtime.

3. Run a Power-On Self-Test (POST): This test will identify basic hardware failures. A failed POST is a hard reject condition and indicates a high probability of internal damage.

4. Test Fan and Cooling System Functionality: Use a thermal imaging camera or a fan speed tester to ensure all fans are operational. A failed fan can lead to overheating and hardware failure within 24–48 hours under load.

5. Review Seller’s Refurbishment Logs: Ask for logs showing component replacements, such as power supplies or fans. Units without logs should be approached with caution, as hidden defects can lead to unexpected failures and $1,000+ in repair costs.

FAQ

Q: Can the HPE ProLiant DX380 Gen10 CTO be used with newer Intel Xeon Scalable processors?
A: Yes, but only up to the second generation (e.g., Xeon Gold 6300 series). The Gen10 platform is not compatible with third-gen Xeons (6400 series), which were introduced in 2021. Using incompatible processors can lead to boot failures and system instability.

Q: Should I buy a used DX380 Gen10 chassis if I need it for a 24/7 production environment?
A: Only if the unit has been fully tested and has less than 50,000 RF-hours of use. Units with more than 70,000 hours are at a 30% higher risk of failure, which could cost $2,000+ in downtime.

Q: How long can I expect a used DX380 Gen10 chassis to last in a data center?
A: With proper maintenance and under normal conditions, a Gen10 chassis can last 4–6 years. However, units over 8 years old should be replaced to avoid unplanned outages.

Q: Is the DX380 Gen10 CTO compatible with HPE iLO 5?
A: Yes, the chassis supports iLO 5 firmware, introduced in 2017. However, older firmware versions may require a flash update, which should be performed by a certified technician to avoid bricking the system.

Q: What is the difference between the DX380 Gen10 and the DL380 Gen10?
A: The DX380 is a chassis-only unit, while the DL380 includes the motherboard and CPU. The DX380 is used in custom builds, whereas the DL380 is a full server. Mixing parts between the two can lead to compatibility issues and void warranties.