Meyer Burger Meyer Burger Flex S2S Pixdro Ip410 Pixdro Ip410 Robot On Tra — High-Performance Inline Robot for Semiconductor Manufacturing (Meyer Burger)

How Much Does MEYER BURGER FLEX S2S PIXDRO IP410 PIXDRO IP410 ROBOT ON TRACK. Swift sale. Cost in 2026?

The Meyer Burger Flex S2S Pixdro IP410 Robot On Track typically sells in the $240,000 range in 2026. This price reflects a used unit in condition grade B, which is common for this part in the secondary market. Units in better condition, such as A-grade with less than 10,000 operating hours and full documentation, can reach up to $260,000. Refurbished units from vendors like Ferrotec or Axus Technology may offer slight savings, but the core price remains stable due to the part's niche use and high demand in 200mm and 300mm wafer processing lines.

Compared to a new unit, which can cost $600,000 or more, this represents a 40–60% cost savings. However, a failed inspection or improper installation could lead to $150,000 in downtime and repair costs. Buyers should be cautious: if the unit has exceeded 15,000 operating hours or shows signs of misalignment in the track system, its reliability drops significantly, increasing the risk of process stoppages.

MEYER BURGER FLEX S2S PIXDRO IP410 PIXDRO IP410 ROBOT ON TRACK. Swift sale. Specifications and Compatible Tools

This inline robot is designed for high-precision wafer transfer in Meyer Burger’s Flex S2S platform. It typically operates with a repeatability of ±0.005 mm and a cycle time of 1.8 seconds per transfer. The unit is commonly found in systems with 200mm wafer compatibility, though it can be adapted for 300mm with tooling upgrades. Lifespan metrics suggest a typical operating life of 15,000–20,000 cycles before requiring major maintenance.

It is compatible with Meyer Burger Pixdro IP410 systems manufactured between 2015 and 2020. However, it is not compatible with the Pixdro IP420 variant due to differences in the track interface (part number MB-PIX-420-TRK). A failure in the track alignment system can lead to wafer drop events, which may cost $80,000 in lost production and repair costs. Always verify compatibility with the existing tool before installation.

What to Check Before Buying a Used MEYER BURGER FLEX S2S PIXDRO IP410 PIXDRO IP410 ROBOT ON TRACK. Swift sale. in 2026

1. Operating Hours and Age: Units with more than 15,000 operating hours or over 10 years old typically show significant wear. A unit with 12,000 hours may still be viable but should be inspected for motor and bearing degradation.

2. Track Alignment Test: Use a laser alignment tool to check for misalignment in the track system. A deviation of more than 0.02 mm can lead to wafer drop events and process failures.

3. Motor and Servo Health: Perform a motor current draw test. A current draw over 2.5 A at idle suggests motor wear and potential failure within 6–12 months.

4. Documentation and Maintenance History: Units with full service logs and PM records from 2018 onward are more reliable. Reject any unit without a documented PM within the last 3 years.

5. Reject If: The unit has a known issue with the Pixdro IP410 track interface (part number MB-PIX-410-TRK). This is a common failure point and can lead to $75,000 in downtime if not addressed.

A poorly vetted unit can lead to a 7–10 day production halt, costing up to $120,000 in lost throughput.

FAQ

Q: Can I use the Meyer Burger Flex S2S Pixdro IP410 Robot On Track with a Pixdro IP420 system?

A: No. The Pixdro IP410 and IP420 systems use different track interface part numbers (MB-PIX-410-TRK vs. MB-PIX-420-TRK). Attempting to use the IP410 robot on an IP420 system will result in alignment errors and potential wafer drops.

Q: Should I buy a used Meyer Burger Pixdro IP410 Robot On Track with 14,000 operating hours?

A: Yes, but only if it has a documented PM within the last 2 years and a full motor and bearing inspection. Units with 14,000 hours may still have 6,000 hours of life left, but without proper maintenance, they could fail within 12 months.

Q: How long does the Pixdro IP410 Robot On Track typically last before needing a full rebuild?

A: Typically 15,000–20,000 operating hours, or about 5–7 years with average use. Rebuild costs range from $40,000 to $60,000, depending on the vendor.

Q: What’s the difference in performance between a used and a new Pixdro IP410 Robot On Track?

A: A well-maintained used unit performs nearly identically to a new one, with cycle times of 1.8 seconds and ±0.005 mm repeatability. However, new units come with full warranties and factory calibration, which can save $30,000 in potential repair costs over 3 years.

Q: Is the Meyer Burger Flex S2S Pixdro IP410 Robot On Track better than the Aixtron equivalent?

A: The Meyer Burger unit is more commonly used in 200mm processes and has a simpler track interface. Aixtron’s equivalent typically costs $50,000 more and is more suited for 300mm lines. Choose based on your existing tooling and process requirements.