Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used
Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used
Market Price
Request Quote — No current market data
Request pricing for the required configuration and condition
Request Quote →Contact for availability. Stock and condition require confirmation for a specific unit.
Selling this part? Place an ask · Talk to a specialist · parts@caladansemi.com
Pricing
Price on request
Request pricing for Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used. The quote must confirm configuration, condition, availability and applicable terms.
How much does a used Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used cost in 2026?
Pricing for used Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used units varies by condition and configuration. Contact us for current 2026 market pricing. Get a quote.
What should I confirm before buying used Wafer Handling?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
Applied Materials 0021-45012-001 Specifications and Compatible Tools
This 3-pin assembly operates at 24V DC, 1.2A with a 50Hz PWM signal, enabling ±0.1mm precision in 5–20mm stroke lengths. Constructed from hardened Inconel 625 with PTFE bushings, it withstands 400°C chamber temps. Compatible with:
- AMAT Centura 5500 (2001–2008)
- Producer S6 (2005–2012)
- Endura 8e (2009–2014)
Exclusion: Not compatible with AMAT Reflexion XP (part #0021-45012-003) due to divergent pin-spacing geometry. Confirm tool’s chamber ID before installation.
What to Check Before Buying a Used 0021-45012-001 Lift Pin Assembly in 2026
- Stroke accuracy: Use a digital caliper to measure ±0.05mm deviation across full range; >0.1mm drift indicates worn bushings.
- Electrical continuity: Test with a multimeter; resistance must stay below 0.8Ω under load.
- Corrosion inspection: Reject units with pitting >50µm on Inconel pins—use a 10x loupe for micro-cracks.
- Cycle count: Request service logs; assemblies with >15,000 cycles since 2018 show 3x higher failure rates.
- Firmware compatibility: Verify part’s revision date (engraved on baseplate) supports 2025+ tool controllers.
FAQ
Q: Is used 0021-45012-001 reliable for high-throughput 300mm lines?
A: Yes, if <8,000 cycles since last overhaul and linear bearings show <15% wear.
Q: How to differentiate 0021-45012-001 vs 0021-45012-003?
A: 003 uses a 4-pin layout; measure pin spacing—001 is 22.5mm center-to-center, 003 is 25.4mm.
Q: Can I retrofit this into a 2016 AMAT Tiger tool?
A: No—Tiger uses #0021-45012-005 with a dual-motor actuator.
Q: Used vs refurbished—what’s better?
A: Refurbished units include replaced bushings and recalibration; used parts require
Related Parts
Used 200mm Semiconductor Equipment
Used 300mm Semiconductor Equipment
Axcelis Technologies 1500-3412-01 Beam Line Aperture Plate — Used
cisco nexus 9300
cisco nexus 9500
dell poweredge r620
Quick Info
Get a Quote
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used.
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com