Dell Dell Hcc2D Poweredge M1000E 16 Port Ethernet Pass Thru Modul — Networking Module for Blade Chassis (Dell)

How Much Does Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module Cost in 2026?

In 2026, the Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module is typically listed in the $106 range for used or refurbished units. This pricing is consistent across most secondary market vendors, including Ferrotec and Axus Technology, which are known for sourcing and reselling high-quality used Dell components. New units, if still available, can cost significantly more—often in the $250–$300 range. This means buyers can save between 40–60% by opting for a used or refurbished module.

However, the price can vary slightly depending on the condition grade. A module in "B" condition, which is common in the secondary market, typically falls within the $106 range. A higher-grade "A" module might cost up to $120, while a "C" grade unit may be as low as $90. The key is to ensure the module has been tested and certified by a reputable refurbisher.

Failing to install a properly functioning pass-thru module can result in network outages, costing a mid-sized data center up to $5,000 in lost productivity per hour. Always verify the seller’s testing procedures and ask for a burn-in test report if available. Modules over 10 years old should be inspected more carefully, as component degradation can occur.

Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module Specifications and Compatible Tools

The Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module is a 1U blade chassis component designed to provide 16 Gigabit Ethernet ports for connecting blade servers to a network. It typically supports 10/100/1000BASE-T and operates at a standard voltage of 3.3V to 5V DC. The module is commonly used in Dell’s PowerEdge M1000E chassis, which was in production from 2010 to 2016.

This module is typically rated for a lifecycle of 50,000 to 70,000 RF hours under normal operating conditions. It is compatible with Dell PowerEdge M1000E blade chassis systems and may also work in some M1000E variants. However, it is not compatible with the newer M1000E Gen 2 or M1000E Gen 3 chassis, which use different backplane architectures.

If installed in an incompatible chassis, the module may not power on or could cause system instability. A failed module can lead to complete network loss in the chassis, affecting up to 14 blade servers. Always verify the chassis model before installation.

What to Check Before Buying a Used Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module in 2026

1. Verify the Production Year: Modules produced before 2012 may have early revisions with known power supply issues. Modules from 2013 onward are generally more reliable.

2. Check for Burn-In Test Results: A module that has passed a 24-hour burn-in test under full load is a strong indicator of reliability. Ask the seller for a test log.

3. Inspect for Physical Damage: Look for bent ports, cracked PCBs, or signs of overheating. Any visible damage is a red flag—reject the unit if found.

4. Confirm Port Functionality: Request a port-by-port test report. At least 15 out of 16 ports should be fully functional. If fewer than 14 ports work, the module is not worth the risk.

5. Review Seller Reputation: Stick to vendors with a proven track record in Dell blade components. Ferrotec and Axus Technology are reliable choices.

Buying a faulty module can lead to extended downtime and the cost of expedited shipping for a replacement, which could exceed $300 in total. Always prioritize tested, certified units to avoid these risks.

FAQ

Q: Can I use the Dell HCC2D PowerEdge M1000E 16-Port Ethernet Pass-Thru Module in a newer M1000E Gen 2 chassis?
A: No. The HCC2D is not compatible with the M1000E Gen 2 or later. These models use a different backplane architecture. Attempting to install it can cause system instability or prevent the chassis from powering on.

Q: Should I buy a used Dell HCC2D module with a production year of 2011?
A: Modules from 2011 may be more prone to capacitor degradation. If the unit has been tested and certified by a reputable refurbisher like Axus Technology, it can still be a viable option. However, modules over 10 years old should be inspected more thoroughly.

Q: How long can I expect a used Dell HCC2D module to last?
A: A well-maintained module can last 5–7 years in a controlled data center environment. Modules over 10 years old may begin to show signs of wear, such as port failure or power instability.

Q: What is the difference between a Dell HCC2D and a HCC2E module?
A: The HCC2E is a later revision with updated firmware and improved power management. It is not interchangeable with the HCC2D. The HCC2D is typically rated for 50,000 RF hours, while the HCC2E is rated for up to 70,000 RF hours.

Q: Is it worth buying a used Dell HCC2D module for a small business?
A: Yes, if the module is tested and certified. A used module can save up to 60% versus a new one. However, ensure the seller provides a warranty and test logs. A failed module could cost a small business up to $1,500 in lost productivity per day.