Dell Dell K002V Powerconnect 10Gbe 48Port Blade Switch Module — 10Gbe Blade Switch for High-Density Data Centers (Dell)

How Much Does Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module Cost in 2026?

As of July 2026, the Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module typically ranges between $81 for a used, refurbished unit in condition grade B. This price is based on sourcing from vendors like Axus Technology and Ferrotec, which specialize in high-quality, tested used networking hardware. Refurbished units in this range usually offer 40–60% savings compared to the original manufacturer’s price, which can exceed $150 for a new unit.

The cost can vary slightly depending on the condition and testing performed. Units in higher condition grades (A or A–) may cost up to $100, while lower-grade B units may be available for as low as $75. However, it's important to note that a failed switch module in a blade chassis can cause up to $1,200 in downtime costs per hour in a mission-critical data center. Therefore, it's not advisable to cut corners on testing or sourcing. Always verify the unit’s service history and ensure it has been tested for at least 24 hours under load. Units over 10 years old should be approached with caution, as failure rates increase significantly after that point.

Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module Specifications and Compatible Tools

The Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module is a 1U blade switch module that supports 48 10 Gigabit Ethernet ports. It is commonly used in blade server chassis like the Dell PowerEdge M1000e, which was introduced in 2010. The module is typically rated for a service life of 100,000 RF-hours, though actual field life can vary based on environmental conditions and usage.

This module is compatible with blade chassis that support the Dell PowerConnect 6224 or 6248 switch models. It is not compatible with the Dell PowerConnect 6224F, which uses a different backplane interface. A mismatch in backplane compatibility can prevent the module from powering on, leading to a complete loss of network access in the blade chassis — a potentially $5,000+ incident in a high-availability environment.

Verify with the seller that the module is labeled for 10GBASE-T and supports SFP+ transceivers. While most units support these features, some older revisions may not. Always cross-check the part number and revision code to ensure compatibility.

What to Check Before Buying a Used Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module in 2026

1. Check the Production Year: Units produced before 2015 are more likely to have higher failure rates. Avoid modules older than 10 years unless they have been recently overhauled.

2. Run a 24-Hour Burn-In Test: This is the most reliable method to identify latent faults. A unit that passes a 24-hour test under full load is significantly less likely to fail in the field.

3. Verify Port Functionality: Use a port tester or a live network test to ensure all 48 ports are operational. A single failed port can render the module unusable in a high-density deployment.

4. Check for Firmware Updates: The module should be running firmware version 5.0.3 or higher. Older versions may lack critical bug fixes and security patches.

5. Reject if the Unit Has a Failed Fan or Power Supply: These are common failure points. A unit with a failed fan or power supply should be rejected outright, as it can lead to overheating and permanent damage — costing up to $3,000 in repairs.

A poorly tested or mismatched module can lead to extended downtime and data loss, with potential costs exceeding $10,000 in a mission-critical environment. Always insist on a full test report and service history before purchase.

FAQ

Q: Can the Dell K002V PowerConnect 10GBE 48PORT Blade Switch Module be used in a Dell PowerEdge M1000e chassis?

A: Yes, the K002V is specifically designed for the Dell PowerEdge M1000e blade chassis. However, it must be installed in a slot that supports 10GBASE-T and SFP+ transceivers. Always verify the chassis slot compatibility before installation.

Q: Should I replace my Dell K002V module if it’s over 10 years old?

A: Yes. Modules over 10 years old are at a significantly higher risk of failure. Field failure rates increase by 20–30% after this point. If the module has not been recently overhauled, it's better to replace it to avoid potential downtime.

Q: How long can I expect a Dell K002V module to last with proper maintenance?

A: With proper maintenance and a stable operating environment, a Dell K002V module can last up to 10 years. Regular firmware updates and annual inspections are recommended to extend its lifespan.

Q: Is the Dell K002V more reliable than the Dell PowerConnect 6224?

A: The K002V is a blade module version of the 6224 and shares the same core hardware. However, the blade form factor can offer better integration and reliability in a chassis environment. Both models have similar MTBF ratings of around 100,000 hours.

Q: What’s the difference between the Dell K002V and the Dell K002V-F?

A: The K002V-F includes fiber SFP+ ports and lacks copper 10GBASE-T ports. The K002V is the standard model with copper ports. They are not interchangeable in all chassis configurations. Always check the backplane compatibility.