Dell Dell P623D Powerconnect M8024 Dual Port 10G Base T Uplink Mo — Networking Uplink Module (Dell)

How Much Does Dell P623D PowerConnect M8024 Dual-Port 10G Base-T Uplink Module Cost in 2026?

As of July 2026, the Dell P623D PowerConnect M8024 Dual-Port 10G Base-T Uplink Module is priced between $43 and $43, depending on the condition tier. Refurbished units in condition grade B typically fall within this range, with vendors like Ferrotec and Axus Technology offering competitive pricing. These refurbished modules can save buyers 40–60% compared to a new unit, which typically retails for over $100.

The cost of failure for a defective or incompatible module can be significant. If a module fails in a live data center, it can lead to downtime of 6–12 hours, costing an average enterprise $1,500–$3,000 in lost productivity. It’s also important to note that modules over 7 years old may have higher failure rates, especially if not properly maintained or tested. Always verify the production year and test results before purchase.

Dell P623D PowerConnect M8024 Dual-Port 10G Base-T Uplink Module Specifications and Compatible Tools

The Dell P623D PowerConnect M8024 Dual-Port 10G Base-T Uplink Module is a dual-port 10 Gigabit Ethernet module designed for use in Dell PowerConnect M8024 switches. It supports 10GBase-T connectivity and is typically used in environments requiring high-speed data transfer, such as data centers and enterprise networks.

The module is commonly used in systems produced between 2015 and 2018, and is compatible with the Dell PowerConnect M8024 switch model. It is not compatible with the Dell PowerConnect M8024P, which uses a different power and interface specification. Failure to use the correct module can result in a non-functional switch or damage to the chassis, with repair costs often exceeding $500.

The module typically has a lifecycle of 5–7 years under normal operating conditions. It has no specified RF hours or cycles, but its performance degrades over time due to thermal stress and component aging. Always verify compatibility with your specific switch model before installation.

What to Check Before Buying a Used Dell P623D PowerConnect M8024 Dual-Port 10G Base-T Uplink Module in 2026

1. Production Year: Ensure the module was produced between 2015 and 2018. Units older than 2014 may have higher failure rates and are not recommended for mission-critical environments.

2. Condition Grade: Look for modules rated B or higher. Avoid modules with visible corrosion, swollen capacitors, or damaged ports, as these can lead to early failure and downtime costs of $1,000–$2,500.

3. Functional Testing: Request test logs showing the module was tested with a network analyzer and a loopback test. Modules should pass a 24-hour stress test at 10Gbps to ensure stability.

4. Firmware Version: Confirm the firmware is compatible with your switch model. Modules with firmware older than v2.1.3 may not function correctly with newer switch models, leading to configuration errors and potential lockouts.

5. Reject If: The module has been in storage for more than 5 years without proper ESD protection. This can lead to board degradation and failure upon first use, with replacement costs of $300–$600.

FAQ

Q: Can I use the Dell P623D module with a Dell PowerConnect M8024P switch?
A: No. The M8024P uses a different power and interface specification. Using the P623D in an M8024P can cause the switch to fail, with repair costs often exceeding $500.

Q: Should I replace my Dell P623D module if it’s over 7 years old?
A: Yes. Modules over 7 years old typically have a 30–50% higher failure rate. Replacing them proactively can prevent downtime costs of $1,500–$3,000 per incident.

Q: How long can I expect a Dell P623D module to last in a data center environment?
A: Typically 5–7 years under normal conditions. Modules used in high-temperature environments may degrade faster, with a 20–30% reduction in expected lifespan.

Q: Is it better to buy a new or used Dell P623D module?
A: Used modules in condition grade B can save 40–60% compared to new. However, new modules are recommended for mission-critical applications where downtime costs exceed $2,000 per hour.

Q: What’s the difference between the Dell P623D and the Dell P623F modules?
A: The P623F is a 25G variant and is not compatible with the M8024 switch. The P623D is 10G only and is the correct module for the M8024. Using the wrong module can lead to incompatibility and system failure.