Dell Dell Poweredge Vxrail P570F Hba330 24 Sff Server Chassis — High-Density Server Enclosure (Dell)

How Much Does Dell Poweredge Vxrail P570F HBA330 24 SFF Server Chassis Cost in 2026?

As of July 2026, the Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis is priced in the range of $312–$312, with the average unit costing $312. This price is typically for a used, refurbished unit in condition grade B, sourced from secondary markets. Refurbishment vendors like Axus Technology and Ferrotec commonly offer this chassis at a 40–60% discount compared to a new unit, which can cost upwards of $800–$900 from Dell’s official channels.

The cost savings are significant for data centers and IT departments looking to scale without capital overruns. However, buying a used chassis carries risk—units with high runtime or poor maintenance history may fail within 6–12 months, leading to unplanned downtime and replacement costs of $1,500–$2,000 per incident. Always ensure the unit has been tested for thermal stability and power draw, and avoid units over 8 years old, as their failure rate increases by 30% beyond that threshold.

Dell Poweredge Vxrail P570F HBA330 24 SFF Server Chassis Specifications and Compatible Tools

The Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis is a 2U rackmount enclosure designed to house up to 24 SFF (Small Form Factor) drives, typically 2.5-inch SSDs or SAS/HDDs. It supports up to 12 hot-swap drive bays per side and features a dual-controller architecture for redundancy. The chassis is commonly used in VxRail hyper-converged infrastructure deployments and is typically rated for 100,000–150,000 runtime hours, depending on usage and cooling conditions.

This chassis is compatible with Dell HBA330 host bus adapters and works with Dell PowerEdge servers from the 14G and 15G generations. However, it is not compatible with the newer HBA420 or HBA340 controllers, which use a different firmware interface. Failure to match the correct HBA can result in a non-booting system, requiring a $300–$500 service call for diagnostics and replacement.

What to Check Before Buying a Used Dell Poweredge Vxrail P570F HBA330 24 SFF Server Chassis in 2026

1. Production Year and Age: Units manufactured before 2018 are generally not recommended due to a 40% higher failure rate. Look for units from 2019 onward.

2. Runtime Hours and Thermal History: Request the unit’s runtime hours and thermal cycling history. Units with over 120,000 hours or frequent thermal cycling are at higher risk of drive backplane failure, which can cost $1,200–$1,800 to repair.

3. Drive Backplane and Controller Health: Use a Dell diagnostic tool like OpenManage to test the backplane and controller. A failed backplane can render the chassis unusable until replaced.

4. Power Supply Condition: Inspect the power supply for bulging capacitors or burn marks. A failed PSU can cause a complete system shutdown and delay deployment by 3–5 days.

5. Firmware and BIOS Version: Ensure the firmware is updated to at least version 2.2.0. Older versions may lack support for newer drives and can lead to compatibility issues and data loss.

Purchasing a faulty chassis can lead to a $2,000–$3,000 loss in downtime and repair costs. Always request a full diagnostic report and return policy before finalizing the purchase.

FAQ

Q: Can I use the Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis with a non-Dell HBA?

A: No. The chassis is specifically designed for the Dell HBA330 and is not compatible with third-party HBAs like the LSI 9207-8i. Using an incompatible HBA can prevent the system from booting and may require a $400–$600 service call to resolve.

Q: How long can I expect the Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis to last in a data center environment?

A: With proper maintenance and under normal load, the chassis typically lasts 5–7 years. Units over 7 years old should be inspected for thermal stress and power supply degradation, as failure rates increase by 25% after that point.

Q: Should I buy a used Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis if I need it for a mission-critical application?

A: Only if the unit is under 6 years old, has under 100,000 runtime hours, and comes with a 90-day warranty. Otherwise, the risk of failure in a mission-critical setup is too high, with potential downtime costs exceeding $2,500 per incident.

Q: What’s the difference between the Dell PowerEdge VxRail P570F HBA330 and the HBA340?

A: The HBA340 supports NVMe drives and has a different firmware interface. The P570F chassis is not compatible with the HBA340. Attempting to use them together will result in a non-booting system and a $300–$500 diagnostic fee.

Q: How much can I save by buying a used Dell PowerEdge VxRail P570F HBA330 24 SFF Server Chassis instead of a new one?

A: You can save 40–60% by purchasing a used unit in good condition. A new chassis from Dell typically costs $800–$900, while a used one ranges from $312–$312.