Dell Dell Vxrail E560 V5 Hba330 Mini 10Xsff Server Chassis — Compact, High-Density Server Enclosure (Dell)

How Much Does Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis Cost in 2026?

As of July 2026, the Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis is priced at $436 for a used, refurbished unit in condition grade B. Refurbished units from trusted vendors like Axus Technology and Ferrotec typically range between $400–$470, depending on the unit’s operational history and cosmetic condition. New units from Dell are not available for this model, as it has been phased out of production since 2022.

Buying a used chassis can save you between 40–60% compared to the original MSRP, which was in the $700–$800 range. However, if the chassis fails due to improper maintenance or hidden faults, the cost of downtime can exceed $1,500 per hour in mission-critical environments. Units with more than 10,000 operational hours are more likely to fail and should be inspected thoroughly. Always verify the unit’s condition and maintenance history before purchase.

Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis Specifications and Compatible Tools

The Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis is a 2U enclosure designed to house up to 10 SFF (Small Form Factor) nodes. It supports a maximum power draw of 1,200W and is typically compatible with Dell PowerEdge R750 and R740 server nodes. The chassis is commonly used in hyper-converged infrastructure (HCI) deployments and typically has a lifecycle of 5–7 years from deployment.

The chassis is not compatible with the Dell HBA320 series due to a mismatch in backplane design. If installed incorrectly, this can lead to node failure and require costly rework. The typical RF (reliability factor) hours for this chassis are around 15,000–20,000 hours. Units with more than 20,000 hours should be evaluated for wear on internal components, as failure can lead to full system downtime and repair costs exceeding $2,000.

What to Check Before Buying a Used Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis in 2026

1. Operational Hours: Units with more than 18,000 hours are high-risk. Exceeding this threshold increases the chance of fan or power supply failure, which can lead to node overheating and data loss.
2. Power Supply Health: Use a multimeter to test output voltages. A deviation of more than 5% from nominal values is a red flag.
3. Fan RPM and Noise: Run a fan diagnostic test using Dell OpenManage. Fans below 1,200 RPM or making grinding noises should be rejected.
4. Backplane Integrity: Inspect for corrosion or burn marks. A damaged backplane can cause intermittent node failures and require full chassis replacement.
5. Production Year: Units produced before 2020 should be rejected. These are more prone to thermal management issues, and failure can cost upwards of $3,000 in repairs.

A unit that fails any of these checks should not be purchased. Buying a faulty chassis can result in unplanned downtime and repair costs that exceed the initial savings.

FAQ

Q: Can I use the Dell VXRAIL E560 v5 HBA330 Mini 10xSFF Server Chassis with non-Dell nodes?
A: No. The chassis is specifically designed for Dell VXRAIL nodes. Using non-Dell nodes can lead to compatibility issues and void warranties. Dell nodes are required to maintain full functionality.

Q: Should I buy a used VXRAIL E560 chassis in 2026?
A: Yes, if it has under 15,000 operational hours and comes with a 90-day warranty. Units with more than 18,000 hours are not recommended. Used units can save you 40–60% compared to new, but only if properly vetted.

Q: How long does the VXRAIL E560 chassis last with proper maintenance?
A: With regular cleaning and fan checks, the chassis can last 5–7 years. Beyond that, component degradation increases the risk of failure. Replacing at 7 years can prevent unexpected downtime.

Q: What is the difference between the VXRAIL E560 and E550 chassis?
A: The E560 supports 10 SFF nodes in a 2U form factor, while the E550 supports 8 nodes. The E560 is more efficient for high-density deployments but is not compatible with E550 node configurations.

Q: How much does it cost to replace a failed VXRAIL E560 chassis?
A: A full chassis replacement can cost between $2,000–$3,000, including labor and downtime. This is why sourcing a used, well-maintained unit is often more cost-effective.