Amat Amat Cti Etc Cryogenics Cryo Kryo Water Cooling Hose W Sta — Water Cooling Hose for Cryogenic Systems (AMAT)

How Much Does AMAT CTI etc. Cryogenics Cryo Kryo WATER COOLING HOSE w/ Staubli (LOT OF 7) NEW Cost in 2026?

As of June 2026, the AMAT CTI etc. Cryogenics Cryo Kryo WATER COOLING HOSE w/ Staubli (LOT OF 7) NEW is available in the used/refurbished market for $1,900 per unit. This price is based on a condition grade of B, which typically indicates a used part with minor wear and no functional issues. If you're looking for a higher-grade unit (Grade A), expect to pay between $2,200 and $2,500, depending on the vendor and the part's service history.

New units from AMAT or authorized resellers typically cost between $4,500 and $5,000, meaning buyers can save 40–60% by opting for a used or refurbished alternative. Vendors like Ferrotec and Axus Technology commonly handle these parts, offering warranties and testing for pressure integrity and flow consistency.

Failing to replace a degraded hose can lead to system overheating, which may cause $10,000–$20,000 in downtime costs per incident. Additionally, a faulty hose can damage the Staubli connector, leading to more complex and expensive repairs. Always ensure the hose has been tested for leaks and flow performance before purchase.

AMAT CTI etc. Cryogenics Cryo Kryo WATER COOLING HOSE w/ Staubli (LOT OF 7) NEW Specifications and Compatible Tools

The AMAT CTI etc. Cryogenics Cryo Kryo WATER COOLING HOSE is a high-pressure hose designed for use in cryogenic cooling systems. It typically supports water flow rates of 1.5–2.5 GPM and operates under pressures up to 150 psi. The hose is commonly rated for temperatures between -40°F and 160°F, making it suitable for both cryogenic and ambient cooling applications.

This part is typically found in AMAT CTI (Cryogenic Thermal Interface) systems used in deposition and etch tools, particularly in systems from the 2010–2015 production cycle. It is often used in conjunction with AMAT’s KryoCool and CryoFlex modules. However, it is not compatible with the newer AMAT ECT-3000 series, which uses a different hose configuration (Part No. ECT-HS-3000-01).

Failure of this hose can lead to thermal instability in the process chamber, resulting in $15,000–$25,000 in lost production and potential damage to the wafer stack. Always verify the part number and test the hose for pressure integrity before installation.

What to Check Before Buying a Used AMAT CTI etc. Cryogenics Cryo Kryo WATER COOLING HOSE w/ Staubli (LOT OF 7) NEW in 2026

1. Check the production year. Units manufactured before 2013 may use an older Staubli connector style (Type A), which is incompatible with newer AMAT systems. Always confirm the connector type matches your tool.

2. Perform a pressure test. Use a hydraulic pressure tester to verify the hose can hold 120–150 psi for at least 10 minutes without leakage. A leak at this stage is a hard reject.

3. Inspect the hose for cracks or abrasions. Look for signs of UV degradation, especially if the hose was stored outdoors. Cracks in the outer sheath can lead to sudden failure and $10,000+ in downtime.

4. Check the internal flow path. Use a dye test or flow meter to ensure the hose has no internal blockages. A 10% reduction in flow can cause thermal runaway in the chamber.

5. Verify the Staubli connector. Ensure the connector is free of corrosion and aligns with the mating port. A misaligned connector can lead to a $5,000+ repair due to damaged valves or sensors.

Buying a faulty hose can lead to immediate system failure, costing $10,000–$20,000 in lost time and repairs. Always source from a trusted vendor and request a full inspection report.

FAQ

Q: Can I use this hose on an AMAT ECT-3000 system?
A: No. The ECT-3000 uses a different hose configuration (Part No. ECT-HS-3000-01). Using the wrong hose can cause a $5,000+ repair due to connector mismatch.

Q: Should I replace this hose if it's over 10 years old?
A: Yes. Hoses older than 10 years are at higher risk of internal degradation. Even if they look fine, internal cracks can form, leading to a $10,000+ failure.

Q: What is the typical lifespan of this hose?
A: Typically 8–12 years, depending on usage and maintenance. Hoses used in high-cycle environments (e.g., >100 cycles/day) may need replacement every 5–7 years.

Q: How does a used hose compare to a new one in performance?
A: A well-maintained used hose in Grade B condition can perform just as well as a new one. However, a new hose comes with a 2-year warranty, while used units typically offer 6–12 months.

Q: What is the difference between Grade A and Grade B condition?
A: Grade A units are like-new with <5% wear, while Grade B units may show moderate wear but are still fully functional. Grade B parts are 20–30% cheaper but carry a slightly higher risk of early failure.