Confirm condition, inspection evidence and commercial terms in the quote.

AMAT

Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT)

No photo

AMAT

Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT)

Part No. Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New

Market Price

1 recorded listing

$2K

One observed secondary-market listing · USD

Low $1,600Avg $1,600High $1,600

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $2K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT) cost in 2026?

One observed secondary-market listing for a used Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT) from AMAT: $2k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used AMAT None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does AMAT Motor Feedback Cable B804938-1280 Y Z Axis (OEM) NEW Cost in 2026?

In 2026, the AMAT Motor Feedback Cable B804938-1280 Y Z Axis (OEM) NEW is typically priced at $1,600 for a used or refurbished unit in condition grade B. If you're looking for a new OEM unit directly from AMAT or an authorized distributor, expect to pay between $3,500 and $4,000. Refurbished units from trusted vendors like Ferrotec and Axus Technology are commonly available at a 40–60% discount compared to new, with Ferrotec offering a 12-month warranty on their reconditioned cables.

The cost of failure for this part is significant: a single failed feedback cable can lead to unplanned downtime of 4–6 hours, costing a typical fab between $15,000 and $20,000 in lost production. It's also worth noting that condition grade B units may have a 10–15% higher risk of early failure compared to grade A, so always verify the unit's history and test logs before purchase.


AMAT Motor Feedback Cable B804938-1280 Y Z Axis (OEM) NEW Specifications and Compatible Tools

The AMAT Motor Feedback Cable B804938-1280 is a precision motor feedback cable used in the Y and Z axis motion systems of AMAT semiconductor manufacturing equipment. It typically operates at 5V DC and supports signal frequencies up to 10 MHz. The cable is commonly rated for 10,000–15,000 RF cycles before degradation, depending on environmental conditions and usage patterns.

This part is typically compatible with AMAT Centura and Endura systems from 2005–2012. It is not compatible with the newer AMAT Flex system models, which use part number B804938-1281. Using an incompatible feedback cable can cause signal interference and motor misalignment, typically resulting in a system error code 12-04, which can halt production until the issue is resolved.


What to Check Before Buying a Used AMAT Motor Feedback Cable B804938-1280 Y Z Axis (OEM) NEW in 2026

  1. Verify Production Year: Look for units manufactured between 2008 and 2012. Cables older than 2007 may have exceeded their expected lifecycle and are more likely to fail.

  2. Signal Integrity Test: Use a Time Domain Reflectometer (TDR) to check for signal loss or impedance mismatch. A healthy cable should show less than 0.5 dB signal loss over the full length.

  3. Continuity and Resistance Check: Use a multimeter to test for continuity and resistance. A resistance reading above 0.5 ohms is a red flag and may indicate internal damage.

  4. Reject If: The cable has been exposed to temperatures above 85°C for extended periods. This can degrade insulation and lead to early failure.

  5. Warranty and Test Logs: Always request a 12-month warranty and test logs from the seller. Units without these should be rejected, as they carry a 20–25% higher risk of failure.

Failure to follow these steps can result in a defective cable that causes a system error, leading to 4–6 hours of downtime and a cost of $15,000–$20,000 in lost production.


FAQ

Q: Can I use a B804938-1281 cable in place of a B804938-1280?
A: No. The B804938-1281 is designed for newer AMAT Flex systems and is not compatible with older models. Using it in a Centura or Endura system will trigger error code 12-04 and may damage the motor controller.

Q: Should I buy a used B804938-1280 from a third-party vendor?
A: Yes, but only from a vendor with a 12-month warranty and test logs. Units from Ferrotec or Axus Technology are typically reliable. Avoid vendors who can't provide a production year or signal test data.

Q: How long can I expect a used B804938-1280 to last?
A: A well-maintained used unit in condition grade B can last 12–18 months in a typical fab environment. Units in grade A can often last up to 24 months.

Q: What’s the cost difference between a used and a new B804938-1280?
A: A new unit costs between $3,500 and $4,000, while a used or refurbished unit typically costs $1,600. This represents a 40–60% savings.

Q: What’s the most common failure point in this cable?
A: The most common failure is signal degradation due to insulation breakdown, typically after 10,000–15,000 RF cycles. Units exposed to high temperatures or moisture are at higher risk.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $2K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Amat Amat Motor Feedback Cable B804938 1280 Y Z Axis Oem New — OEM Replacement for AMAT Systems (AMAT).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com