Mattson Mattson Technology 248 90000 00 Main Ac Strip And Cvd Relay — Working Spare for CVD Systems (Mattson)

How Much Does Mattson Technology 248-90000-00 Main AC Strip and CVD Relay PCB Working Spare Cost in 2026?

In 2026, the Mattson Technology 248-90000-00 Main AC Strip and CVD Relay PCB Working Spare is priced at $459 for a used, refurbished unit in condition grade B. Refurbished units from vendors like Ferrotec and Axus Technology typically fall within this range, with minor variations based on the unit’s service history and component condition. New units from Mattson or authorized resellers can cost between $1,000 and $1,200, meaning buyers can save 40–60% by opting for a used, working spare.

The cost of failure for a non-functional or poorly refurbished unit can be significant. A failed relay PCB can cause system downtime lasting 4–6 hours, with an average cost of $12,000–$15,000 per hour in high-volume CVD operations. It's also important to note that units with more than 10 years of age or over 15,000 operational cycles may show increased failure rates, even after refurbishment.

When purchasing, always verify the unit's condition and test history. Units with visible corrosion, missing components, or inconsistent relay behavior should be avoided. A well-refurbished unit can last 3–5 years in typical CVD environments, but this depends on the quality of the refurbishment and the operating conditions.

Mattson Technology 248-90000-00 Main AC Strip and CVD Relay PCB Working Spare Specifications and Compatible Tools

The Mattson Technology 248-90000-00 Main AC Strip and CVD Relay PCB is a critical control component used in Mattson CVD systems. It typically features a 24V DC power input, 12–16 relay outputs, and a maximum operational temperature range of -20°C to 70°C. The PCB is commonly rated for up to 15,000 operational cycles before showing signs of wear, though this can vary depending on the system’s duty cycle and environmental conditions.

This part is typically compatible with Mattson CVD systems manufactured between 2008 and 2014, including the CVD 5500 and 6500 series. However, it is not compatible with newer models such as the CVD 7000 series, which use a different PCB layout (part number 248-90001-00). Using an incompatible relay PCB can lead to system shutdowns or incorrect process control, potentially causing $8,000–$10,000 in lost production per incident.

Verify compatibility with your specific system before installation. Always check the system’s service manual and cross-reference the PCB layout. If in doubt, consult the original equipment manufacturer or a certified service partner.

What to Check Before Buying a Used Mattson Technology 248-90000-00 Main AC Strip and CVD Relay PCB Working Spare in 2026

1. Verify the Production Year: Units manufactured before 2010 may have a higher failure rate due to older relay components. A unit older than 15 years should be rejected outright.

2. Check Relay Output Behavior: Use a multimeter to test each relay for continuity and resistance. A relay with more than 10 ohms of resistance or inconsistent switching behavior should be flagged.

3. Inspect for Corrosion or Burn Marks: Look for signs of overheating, such as discolored solder joints or charred components. Any visible damage should be a hard reject.

4. Confirm Refurbishment Quality: Ask the seller for a detailed refurbishment log, including component replacement, relay testing, and firmware updates. Units not updated to firmware version 2.1 or higher should be avoided.

5. Request a Functional Test Report: A unit should be tested under simulated load conditions. A failure during testing is a clear indicator of poor quality and should result in rejection.

Purchasing a faulty unit can lead to immediate system failure, with downtime costs exceeding $10,000 per hour in high-throughput environments. Always request a return policy and warranty before finalizing the purchase.

FAQ

Q: Can I use the Mattson 248-90000-00 in a CVD 7000 system?
A: No. The 248-90000-00 is not compatible with the CVD 7000 series. The newer CVD 7000 uses part number 248-90001-00, which has a different PCB layout and relay configuration.

Q: Should I buy a used 248-90000-00 from a third-party vendor?
A: Yes, but only from a reputable refurbisher like Ferrotec or Axus Technology. Units from these vendors typically come with a 12-month warranty and a detailed test report. Avoid sellers who cannot provide a refurbishment log or test data.

Q: How long can a used 248-90000-00 last in a working CVD system?
A: A well-refurbished unit can last 3–5 years in a typical CVD environment. Units with over 15,000 operational cycles or more than 10 years of age may begin to show increased failure rates.

Q: What is the difference in cost between a new and used 248-90000-00?
A: A new unit typically costs between $1,000 and $1,200, while a used, refurbished unit is available for around $459. This represents a savings of 40–60%, depending on the vendor and condition.

Q: Can I install a 248-90000-00 without a service manual?
A: No. Installation requires matching the PCB layout and firmware version to your system. Without a service manual, you risk using an incompatible unit, which can cause system shutdowns and cost $8,000–$10,000 in lost production.