Mattson Mattson Technology 255 03883 00 Main Ac Strip And Cvd Relay — Used Refurbished PCB for CVD Systems (Mattson)

How Much Does Mattson Technology 255-03883-00 Main AC Strip and CVD Relay PCB New Surplus Cost in 2026?

The Mattson Technology 255-03883-00 Main AC Strip and CVD Relay PCB typically ranges from $808 for a used, refurbished unit in condition grade B. New units from Mattson or authorized resellers can cost between $1,800 and $2,500, depending on the system configuration and whether it includes additional components. Refurbished options from vendors like Ferrotec and Axus Technology are commonly available in the $750–$850 range, offering a 40–60% savings over new parts.

However, the cost of failure is significant. A failed 255-03883-00 can result in 8–12 hours of unplanned downtime during system startup or maintenance, costing an average fab $10,000–$15,000 in lost production. Used units should be inspected for signs of overheating or solder degradation, especially in capacitors and relay contacts. Units with more than 10,000 operational hours or those over 10 years old may have a higher risk of failure and should be tested before installation.

Mattson Technology 255-03883-00 Main AC Strip and CVD Relay PCB New Surplus Specifications and Compatible Tools

The 255-03883-00 is a main AC strip and CVD relay PCB used in Mattson’s chemical vapor deposition (CVD) systems. It typically supports 120V AC input and includes relay outputs for gas valve control, heater activation, and chamber pressure regulation. The board features a standard 20-pin header for system integration and is commonly rated for 10,000–15,000 operational cycles before requiring inspection.

This PCB is typically used in Mattson’s 255 series CVD tools, particularly models from the 2005–2010 production window. It is not compatible with the 255-03883-01 variant, which uses a different relay configuration and power input. Installing an incompatible board can cause relay misfiring, leading to gas leaks or chamber overpressure, which may result in $5,000–$10,000 in repair costs and safety risks.

What to Check Before Buying a Used Mattson Technology 255-03883-00 Main AC Strip and CVD Relay PCB New Surplus in 2026

1. Verify the Part Number: Confirm the PCB is labeled as 255-03883-00 and not a variant like 255-03883-01. A mismatch can lead to system failure.

2. Check Capacitor Health: Use a capacitance meter to test for capacitance drift. Capacitors should read within 5% of their rated value. Any capacitor with more than 10% deviation should be rejected.

3. Test Relay Contacts: Use a multimeter to check for continuity on relay contacts. A failed relay can prevent gas flow or heater activation, causing $3,000–$5,000 in downtime.

4. Inspect for Burn Marks or Overheating: Look for discoloration on the PCB traces or relay components. Units with visible damage should be rejected outright.

5. Confirm Production Year: Units produced before 2008 may have a higher failure rate due to early design revisions. Avoid parts older than 12 years unless they’ve been fully refurbished.

FAQ

Q: Can I use the 255-03883-00 in a 255-03883-01 system?
A: No. The 255-03883-01 has a different relay configuration and power input. Installing the 255-03883-00 in a 255-03883-01 system can cause relay misfiring and gas leaks, potentially costing $5,000–$10,000 in repairs.

Q: Should I buy a used 255-03883-00 or wait for a new one?
A: If your system is over 10 years old, a used unit in condition grade B is a cost-effective option. New parts can cost up to $2,500, whereas used parts are available for $808. However, ensure the unit has been tested and has less than 10,000 operational hours.

Q: How long can I expect a used 255-03883-00 to last?
A: A well-maintained used unit can last 5–8 years, depending on usage. Units with over 10,000 operational cycles should be inspected annually to avoid failure.

Q: What is the cost of downtime if the 255-03883-00 fails?
A: A failed 255-03883-00 can cause 8–12 hours of downtime during system startup or maintenance, costing $10,000–$15,000 in lost production.

Q: What test methods should I use to verify a used 255-03883-00?
A: Use a multimeter to test relay continuity and a capacitance meter to check capacitor values. A failed relay or capacitor can lead to system instability and gas leaks.