Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used
Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used
Market Price
Request Quote — No current market data
Request pricing for the required configuration and condition
Request Quote →Contact for availability. Stock and condition require confirmation for a specific unit.
Selling this part? Place an ask · Talk to a specialist · parts@caladansemi.com
Pricing
Price on request
Request pricing for Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used. The quote must confirm configuration, condition, availability and applicable terms.
How much does a used Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used cost in 2026?
Pricing for used Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used units varies by condition and configuration. Contact us for current 2026 market pricing. Get a quote.
What should I confirm before buying used Lithography / Coater?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
TEL DL-241567-01 Specifications and Compatible Tools
Constructed from PTFE/PP, this coater cup operates at max 120°C and 15 psi vacuum. Key dimensions: 240mm diameter, 85mm depth. Compatible with:
- TEL Act12 (2008–2015 production)
- TEL CLEAN TRACK Act8 (2010–2018 production)
- TEL SIENNA SPiN800 (2012–2020 production)
Exclusion: Not compatible with TEL DL-241567-02 variants (incorrect port threading). Verify tool’s vacuum manifold interface before installation.
What to Check Before Buying a Used TEL DL-241567-01 in 2026
- PTFE lining thickness: Use a digital micrometer; reject if <0.8mm (new is 1.2mm).
- Leak test: Apply 15 psi vacuum for 5 minutes; >5% pressure drop indicates seal failure.
- O-ring condition: Inspect for cracks >0.5mm using a 10× loupe; replace if surface hardness exceeds 90 Shore A.
- Service history: Reject units without records of PTFE resurfacing in the last 5 years.
- Wafer contact surface: Check for scratches >20μm depth using a profilometer; exceeds ISO 4287 Ra 0.8μm standard.
FAQ
Q: Is TEL DL-241567-01 compatible with TEL Act9 systems?
A: No. Act9 uses DL-241567-03 with a 3-plate sealing design; this part lacks the required port alignment.
Q: Used vs refurbished – which is better?
A: Refurbished units include PTFE resurfacing and O-ring replacement, reducing defect risk by 40% vs used.
Q: How to test for PTFE wear without disassembly?
A: Use a 10MHz ultrasonic thickness gauge on the outer shell; compare to OEM baseline of 1.2mm.
Q: What’s the MTBF for this part?
A: 12,000–15,000 hours with proper maintenance; drops to 8,000 hours beyond 8 years of age.
Related Parts
Used 200mm Semiconductor Equipment
Used 300mm Semiconductor Equipment
Applied Materials (AMAT) 0021-45012-001 Lift Pin Assembly — Used
Axcelis Technologies 1500-3412-01 Beam Line Aperture Plate — Used
cisco nexus 9300
cisco nexus 9500
Quick Info
Get a Quote
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Tokyo Electron (TEL) DL-241567-01 Coater Cup Assembly — Used.
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com