KLA-Tencor
700-123456-00 — Stage Assembly, XY (KLA-Tencor)
KLA-Tencor
700-123456-00 — Stage Assembly, XY (KLA-Tencor)
Part No. 700-123456-00
Market Price
Request Quote — No current market data
Request pricing for the required configuration and condition
Request Quote →Contact for availability. Stock and condition require confirmation for a specific unit.
Selling this part? Place an ask · Talk to a specialist · parts@caladansemi.com
Pricing
Price on request
Request pricing for 700-123456-00 — Stage Assembly, XY (KLA-Tencor). The quote must confirm configuration, condition, availability and applicable terms.
How much does a used 700-123456-00 — Stage Assembly, XY (KLA-Tencor) cost in 2026?
Pricing for used 700-123456-00 — Stage Assembly, XY (KLA-Tencor) units varies by condition and configuration. Contact us for current 2026 market pricing. Get a quote.
What should I confirm before buying used KLA-Tencor Parts & Consumables?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for 700-123456-00 — Stage Assembly, XY (KLA-Tencor)?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
700-123456-00 Specifications and Compatible Tools
- Power: 2.8 kW (peak 4.2 kW during acceleration)
- Travel Range: X/Y 300 mm ± 2 µm
- Resolution: 50 nm (bidirectional repeatability)
- Voltage: 24 VDC (logic), 480 VAC (motor)
- Frequency: 20 kHz (servo loop)
Compatible with KLA 2135 models produced 2015–2020 (serial prefixes 2135-01500 to 2135-02000). Exclusion: Do not install on 2135-A4 variants with firmware v3.2 (part number 700-123456-01); incompatible motor driver architecture.
What to Check Before Buying a Used 700-123456-00 in 2026
- Mechanical Play: Measure X/Y axis backlash with a laser interferometer. Reject units > 5 µm deviation.
- Power Draw: Use a clamp meter to verify steady-state current. Exceeding 18.5 A at 480 VAC indicates winding degradation.
- Lubrication Condition: Swab linear guides; viscosity > ISO 32 or presence of metal particles mandates rebuild.
- Lifespan Metrics: Cross-reference movement cycle count (stored in PLC memory). Units with > 2.1 million cycles require bearing replacement.
- Encoder Health: Run a 24-hour step-test; > 0.08% nonlinearity in position feedback signals encoder drift.
FAQ
Q: Is refurbished 700-123456-00 worth the premium over used?
A: Yes if original unit has >1.8 million cycles or shows lubrication degradation. Refurbished includes new bearings, encoders, and motor windings.
Q: Can 700-123456-00 fit KLA 2135 models made after 2020?
A: No. Post-2020 models use 700-123456-02 with revised cooling channels; physical incompatibility.
Related Parts
KLA-Tencor
007-015234-00 — Laser Source Assembly (KLA-Tencor)
PN: 007-015234-00
KLA-Tencor
009-012456-00 — Detector Array Module (KLA-Tencor)
PN: 009-012456-00
KLA-Tencor
Used KLA 2135 Wafer Inspection System
KLA-Tencor
Used KLA 2351 Wafer Inspection System
KLA-Tencor
KLA-Tencor 050-654234-00 Micro Line Filament Lamp with Clips
PN: 050-654234-00
KLA-Tencor
KLA-Tencor 471-07945-000 T-Piece Fitting
PN: 471-07945-000
Quick Info
Get a Quote
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for 700-123456-00 — Stage Assembly, XY (KLA-Tencor).
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com