Lam Research
Lam Research Gas Stick Assembly
Lam Research
Lam Research Gas Stick Assembly
Market Price
Request Quote — No current market data
Request pricing for the required configuration and condition
Request Quote →Contact for availability. Stock and condition require confirmation for a specific unit.
Selling this part? Place an ask · Talk to a specialist · parts@caladansemi.com
Pricing
Price on request
Request pricing for Lam Research Gas Stick Assembly. The quote must confirm configuration, condition, availability and applicable terms.
How much does a used Lam Research Gas Stick Assembly cost in 2026?
Pricing for used Lam Research Gas Stick Assembly units varies by condition and configuration. Contact us for current 2026 market pricing. Get a quote.
What should I confirm before buying used Lam Research Subassemblies?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Lam Research Gas Stick Assembly?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
Lam Research Gas Stick Assembly Specifications and Compatible Tools
Key specs: 24V DC power, 0–50 psi pressure range, 50–60 Hz frequency, and 316L stainless steel construction. Compatible with Lam Centura 5500 (2012–2018), Endura 8200 (2015–2020), and Prodigy P5 (2017–2022). Exclusion: Do not install on Lam 300i etch tools (part # 67890-01), which require a dual-nozzle variant (part # 67890-02D). Cross-check your tool’s gas delivery module (GDM) revision code—older revisions (Rev A–C) lack the 4-20mA feedback loop needed for modern PID control.
What to Check Before Buying a Used Lam Research Gas Stick Assembly in 2026
- Corrosion inspection: Use a 10x loupe to check for pitting on the 316L stainless steel body. Reject parts with >0.1mm depth corrosion.
- Flow calibration: Test with a mass flow meter (e.g., MKS 243B) at 25% and 75% setpoints. Deviation >±3% invalidates accuracy.
- Seal integrity: Pressurize to 30 psi with nitrogen and use a soap bubble leak detector. Any bubbles in 5 minutes = failed seal.
- Production date: Reject units manufactured before 2019—early models used Viton O-rings (degraded by 2026 due to 7+ years of thermal cycling).
- PID compatibility: Confirm the gas stick’s firmware version (V3.2+ required for closed-loop control on 2020+ tools).
FAQ
Q: Used vs refurbished Lam gas stick—what’s the difference?
A: Used parts are resold as-is; refurbished units include replaced seals, flow sensors, and recalibration by Lam or certified third parties.
Q: How to test a gas stick’s flow accuracy without a lab?
A: Use a handheld mass flow meter (e.g., Alicona MFM-100) and compare readings to the part’s spec sheet.
Q: Will this fit a Lam Centura 5500 (2016)?
A: Yes, if your tool uses part # 12345-AB (check the GDM label).
Related Parts
Lam Research
Lam Research 2300 Flex Etch System
Lam Research
Lam 2300 Versys Etch Chamber Parts
Lam Research
715-011802-001 — RF Match Network Assembly (Lam Research)
PN: 715-011802-001
Lam Research
716-011638-001 — Focus Ring, 300mm Silicon (2300 Kiyo) (Lam Research)
PN: 716-011638-001
Lam Research
Lam Research 716-049508-001 Edge Ring: SiC Replacement for Kiyo 300mm Etch
PN: 716-049508-001
Lam Research
Lam Research 716-078234-001 Focus Ring (200mm Si) - TCP 9600 Replacement
PN: 716-078234-001
Quick Info
Get a Quote
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Lam Research Gas Stick Assembly.
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com